1 x 3.2m Ramish Kleinewefers 2 Roll Thermo Hydrein Embossing Calender, 1994

1 x 3.2m Ramish Kleinewefers 2 Roll thermo Hydrein Embossing Calender,

Brief technical information:

The Calender comprises two steel rollers.
The top roller is engraved and the bottom roller is a deflection compensating roll.
The bottom roller uses the Ramisch Kleinewefers Hydrein pressure system.

Thermo- Hydrein HT Roll System
For assembly in a 2 roll non-woven Calender

Design data
Line load range: 15 – 80 N/mm
Speed range: 5 – 20 m/min
Frame centre distance: 4200mm
Working width: 3200mm
Counter roll (engraved) diameter: 550mm

Thermo Hydrein HT roll
External diameter: 445mm
Roll surface width: 3300mm
Roll surface temperature: 130 - 250°C
Cooling System
This is based on a cooling water inlet temperature of maximum 20°C at a pressure of approx. 2 bar and an outlet temperature of maximum 40°C


Offer Comprising of:

1. Input C M Machinery Transport Lattice and Metal detector (No. 4603, Year. 1994)
Metal Detector - Lock Inspection Systems Ltd (Metalcheck 9)

2. Edge trimming Section.

3. Two edge trim shredders.
- Dell'orco Edge trim opener - AC/500 Year 2004
- Temafa Edge trim opener - Year 1998

4. 3.2m Ramisch Kleinewefers 2 Roll Thermo Hydrein Embossing Calender
- Type: RKK 250, Year : 1994

5. Oil heating plant for Calender.
- Aura Thermo Heating Oil Plant - Type: AKS 300 Year:1994

6. ICS Water Chiller – Year 1994
The ICS Water Chiller is (used to cool the Hydraulic unit, oil lubrication unit and the two cooling rolls on the Calender).

7. Windup feed rolls.
CM Machinery, Ser. No. 4555-1 Year 1994

8. CM Machinery Turet Windup.
Serial. No. 4562, Year 1994

•     Electrical Supply: 3 Phase 380-440v, 50Hz
Additional Information:
Status:          Dismantled and stored in warehouse
Condition:    Complete and in good working condition
Location:      United Kingdom
Availability:  Immediately

More pictures available upon request

1 - 3.2m Ramisch Kleinewefers.JPG

2 - 3.2m Ramisch Kleinewefers.JPG

3 - 3.2m Ramisch Kleinewefers.jpg

4 - 3.2m Ramisch Kleinewefers.jpg

5 - Input Lattice.jpg

6 - Metal Detector.jpg

7 - Edge trimming Section.jpg

8 - Dell'Orco Selvedge Edge Shredder.jpg

9 - Temafa Selvedge Edge Shredder.jpg

10 - 3.2m Ramisch Kleinewefers Embossing Calender.JPG

11 - Oil Heating Plant (1).JPG

12 - Oil Heating Plant (2).jpg

13 - ICS Water Chiller.JPG

14 - ICS Water Chiller.jpg

15 - Windup feed rolls.jpg

16 - Turet Windup.jpg

17 - Turet Windup (Before Dismantling).JPG